English
Wireless Panel Antenna in most cases can not be attached directly to the device (wifi router, signal booster, etc.) without some type of cable converter/adapter. This Antenna has SMA connector so it will need the cable/converter from SMA female type to your device connector type, usually some pigtail coax SMA cable connector.
The antenna does not come with mast pole mount; it comes with two U-bolts which can be used with the attached plate for pole mounting. It allows horizontal or vertical polarization.
The Panel antenna is used to direct the WiFi beam. It will increase the signal/reception in the direction it is pointing.
| Electrical | |
| Frequency Range | 5150-5875MHz |
| F/B Ratio | ＞35dB |
| Gain | 20dBi |
| V.S.W.R | ≤1.7 |
| Radiation | Direction |
| Horizontal Beam width | 11° |
| Vertical Beam width | 14° |
| Polarization | Vertical or Horizontal |
| Lightning Protection | DC Grounded |
| Maximum Input Power | 50W |
| Impedance | 50Ώ |
| Cable Type/Length | RG316/30CM |
| Connector | SMA Female(Customed) |
| Antenna Radome Material | ABS |
| Mounting way | Pole Mount |
| Diameter of Installation Pole | Ø30~Ø50mm |
| Mechanical | |
| Dimensions | 200x175x88mm |
| Weight | 700g |
| Operating Temperature | -40℃ to+70℃ |
| Rated Wind Velocity | 60m/s |
| RoHS Compliant | YES |
Panel antenna is used to radiate the signal into the forward space.
It is designed for use on stationary objects such as buildings or houses, but it is widely used for remote connection at campgrounds, RV motorhomes, boats, or remote devices like WiFi cameras.
It allows horizontal or vertical polarization.
Asian Creation pays attention to the quality and service. We Keeping progressing, Pursuing integrity, Embracing future. Our teams arelways enthusiastic and welcome to visit us and join hands for a prosperous future.
