English
Power Splitter, Broadband High Bandwidth 800 - 2500 MHz GSM900, CDMA, GSM1800 and UMTS These 2-way power splitters are individually designed to be used with GSM900, CDMA, GSM1800 and UMTS.
The power splitter is designed to equally split one input signal into 2, 3 or 4 outputs. When building an indoor coverage system the splitter is often used to split signals between floors and antennas.
The functionality of handling both transmitting and receiving signals in the same path is highly benefi cial since the TX signal is split and the RX signal is combined in the same stage and component.
| Electrical Specifications | |
| Passband | 800-2500MHz |
| Input return loss | ˃20dB |
| Split loss | ˂3.0dB |
| Dissipative loss | ˂0.1dB |
| Max input power/port | 300 W avg |
| Impedance in/out | 50Ω |
| Mechanical Specifications | |
| Dimensions (W x H x D) | 210x25x60mm |
| Weight | 176g |
| Connector | N Female |
| Environmental Specifications | |
| Temp. range (normal operation) | -35 to +75℃ |
| Humidity | Relative 5 - 95% |
| Sealing | IP65 |
800-2500MHz 2 way cavity RF Power Splitter for cellular mobile communications and spread spectrum communications in indoor distribution system.
Microstrip or stripline designs are utilized, and optimized for best performance.
This is use fo Split the one Input signal into 2,3 or more paths in telecommunication applications.
Asian Creation pays attention to the quality and service. We Keeping progressing, Pursuing integrity, Embracing future. Our teams arelways enthusiastic and welcome to visit us and join hands for a prosperous future.
