SMA female PCB connector has a 50 Ohm impedance and has an edge mount ,it is designed for a wide variety of Printed-Circuit Board (PCB) applications in RF and microwave systems.
This SMA female connector uses solder as an attachment method.Our SMA female PCB connector provides a minimum frequency of DC and a maximum frequency of 6 GHz.
This SMA female PCB connector has a PTFE dielectric type and a VSWR of 1.5:1.It is brass body with gold plating and uses beryllium copper alloy contacts and gold plating material.RoHS and REACH compliant.We can customize this kind SMA connectors of various size.
| Electrical | ||
| Frequency | DC to 3GHz | |
| Impedance | 50ohms | |
| Orientation | Straight | |
| VSWR | Straight 1.20 max .Right angle 1.25 max | |
| Termination Style | PCB | |
| Temp.range | -65~+165°C (PE Cable -40~+85°C) | |
| Vibration | MIL-STD-202,Method 213 | |
| Working Voltage | 335V max | |
| Withstand Voltage | 1000V rms | |
| Center Contact | ≤ 3 mΩ | |
| Outer Contact | ≤ 2 mΩ | |
| Insulation resistance | ≥ 5000 MΩ | |
| Insertion loss | ≤0.15 dB | |
| Durability(mating) | ≥500 cycles | |
| Part Name | Material | Finish |
| Body,Metal Parts | Brass | Gold,Nickel |
| Center Contact (Plug) | Brass | Gold |
| Center Contact (Jack) | Beryllium Copper | Gold |
| Insulator | PTFE | |
| Crimp Ferrule | Annealed Copper | Glod or Nickel |
| Clamp Gaskets | Silicone Rubber | |
The Connector are the bridge between all signals.
A crimp connector is used to terminate the end of a coaxial cable to allow.
Connection to an RF device or antenna SMA plug Gold plated pin, body & ferrule.
Asian Creation pays attention to the quality and service. We Keeping progressing, Pursuing integrity, Embracing future. Our teams are always enthusiastic and welcome to visit us and join hands for a prosperous future.